Moran Floors specialise in the refurbishment of large floor areas, Stadiums, Gymnasiums, School Halls, and large commercial floors.

Skilled craftsman, CSCS registered. All work guaranteed.

Our services

• Stripping and removal of waxes and polishes
• Refurbishment, sanding and sealing
• Linemarking
• Advice regarding Cleaning and Maintenance
• Recommendations regarding machinery and equipment to maintain floors in peak condition.

Sanding:
Initial sanding is done with a large floor sander using progressively finer grits for a smooth finish. Edges of the floor are sanded with a rotary edge sander and sometimes with a 4 inch belt sander. Corners are often scraped and sanded by hand. The overall floor may be finished with a large rotary floor sander. The modern machines have good dust extraction and keep the site reasonably clean. Sanding between coats need only be sufficient to flatten any raised grain and remove any ‘nibs’. This can be done with a hand held obital or finishing sander for small areas, or a large upright orbital/finishing sander or rotary sander as dictated by the area.

Sealing:
Sealing is essential to protect the floor and permit easy maintenance. The type and grade of sealer is dictated by the end use and amount of traffic. We use mostly water based laquers which are easier to use and comply with current safety regulations. In addition they are faster drying – about 1-2 hrs between coats, easy to apply and extremely tough and durable. Oiled finishes are also available.

CALL OR  E-MAIL US NOW ON: 0117  967 5873 or enquiry@moranfloors.co.uk